General Features:
TM
ClassicTone Part Number 40-18013
Note: These are reference numbers only.
See specifications for details.
Vintage Constructed Amplifier Transformers by Magnetic Components, Inc.
MADE IN USA
Fender Style:  4/8/16 Ohm, 100W Output Transformer  
Part Number 40-18013
Other Related ClassicTone Offerings to Part Number 40-18013:
*Disclaimer: Magnetic Components, Inc. is not affiliated with Fender Musical Instruments Corp., Marshall Amplification, Vox Amplification, Ltd., Leslie & Valco 
**All of the above listed amplifier models are trademarks of Fender Musical Instrument Corp., Marshall Amplification, Vox Amplification Ltd., Hammond Suzuki     USA, Ltd. (Leslie)  & Eastwood Guitars (Valco)
ClassicTone is a registered trademark of Magnetic Components, Inc. 
Copyright 2009-2021 Magnetic Components, Inc. All Rights Reserved.
WARNING: Transformers should always be installed by a professional electronics technician since there are high voltages involved and may result in serious physical harm to yourself, the transformer and/or your equipment if installed incorrectly. 
Paper layer wound like the vintage era originals!
Made in USA by us at Magnetic Components, Inc.
Made with premium materials
Features custom, solventless, varnish for vintage look and high performance
Proper raised mountings / No chassis modification required on most
Made with pre-tinned "Topcoat" PVC appliance wire for ease of soldering
RoHS Compliant
ClassicTone Series: Vintage, Plus & Custom
CLASSICTONE #           TYPE                                           REFERENCE #
40-18013               Output, 100W - 4/8/16 Ohm        125A29A, 022689, 022889, 022899, 037612                                        (Standard Mounting)



Amps Used In: Showman**, Showman Reverb**, Dual Showman**, Dual Showman Reverb**, Twin Reverb**, Twin Reverb 100**, Quad Reverb 100**, Super Six Reverb 100**, Bassman 100**, '65 Twin Reverb Reissue**, Vibrasonic** style amps...See Specifications for details.

Description: Standard Mounting Style = 2-3/8" x 3-1/4" (will not fit original amp mountings without modification...see 40-18102 for proper offset and raised mounting style like the originals). This is the 4/8/16 Ohm version of the classic and a good fit for some aftermarket amp kits. Paper layer wound output transformer for that ultimate tone! Uses the best cool running, M-6 grain oriented steel for incredible performance! A great variant offering multiple impedances of 4, 8 and 16 Ohms!

Series: Plus
Chokes
Reverb Driver
Power Transformers
Output Transformers
40-18004 (120V Original Version)
40-18042 (120/220/230/240V Version with extra features)
40-18012 (2K - 4 Ohm, Original Vintage Offset & Raised Mounting Version)
40-18113 (2K- 4 / 8 Ohm, Original Vintage Offset & Raised Mounting Version)
40-18102 (2K - 4 / 8 / 16 Ohm, Original Vintage Offset & Raised Mounting Version)
40-18013 (2K - 4 / 8 / 16 Ohm Version with Standard Mounting)
40-18003 (4 Hy, 90mA DC)
40-18034 (25K - 8 Ohm)
Please buy from ClassicTone Resellers while supplies last.