General Features:
TM
Paper layer wound like the vintage era originals!
Made in USA by us at Magnetic Components, Inc.
Made with premium materials
Proper raised mountings / No chassis modification required on most
Made with pre-tinned "Topcoat" PVC appliance wire for ease of soldering
RoHS Compliant
Two exclusive series: ClassicTone Vintage and ClassicTone Plus
ClassicTone Part Number 40-18026
Our Exclusive, Full Line Distributors
CLASSICTONE # TYPE REFERENCE #
40-18026 Output, 100W- 4/8/16 Ohm C1998, C2668
Amps Used In: 100W Plexi**, JMP** and JCM800** type amplifiers
Description: Great vintage era type constructed, paper layer wound output transformer! Incredible output transformer for Plexi**, JMP** and JCM800** type amplifiers. Due to the great tonal qualities of paper layer wound transformers, these can be considered upgrades to the many nylon bobbin wound versions currently available on the market. These are upright mounted transformers. These may be used as a general replacement / upgrade output transformer for original amps. They can also be used to modify existing Marshall* style amps including the Chinese made Bugera 1960 as well as others. You can swap out the cheaper nylon bobbin wound, Chinese transformer for our paper layer wound upgrade output transformer for a truly great tonal upgrade! Chassis mounting hole modification may be required for some original and upgrade applications.
See Specifications for details.
Series: Plus
Note: These are reference numbers only.
See specifications for details.
Vintage Constructed Amplifier Transformers by Magnetic Components, Inc.
Part Number 40-18026
Marshall Style: 4/8/16 Ohm, 100W Output Transformer
Terms and Conditions
MADE IN USA
Not all distributors or resellers are alike! Many offer various other brands besides ClassicTone. Beware of these substitutes! These may be substandard products that are not true replacements, use inferior construction methods and materials and lack the great features and pricing of our ClassicTone transformers. We are proud to announce Amp Parts Direct and Triode USA exclusively features our great product line.
Warranty: We supply a 1 year warranty for defects from the date code marked on transformer. We will not replace, supply credit or refunds, etc. unless the transformer is actually proved to be defective. Therefore, please verify that all specifications are appropriate for your application before you purchase our transformers. Also, this warranty applies only if purchased directly from us. If you believe you have a defective transformer that is ours but purchased from a distributor, reseller, etc, you must contact them directly and their warranty policies will apply. If you believe you have received a defective transformer directly from us, you must contact us for a return authorization number. At which time, you will be required to return the transformer. You will be responsible for the cost of freight to return the item. We reserve the right at our option to either repair, replace, issue a credit or supply a refund if the item is verified defective by us only. Warning!: Transformers should always be installed by a professional electronics technician since there are high voltages involved and may result in physical harm to yourself, the transformer and/or your equipment if installed incorrectly. We will not be responsible for any types of damages incurred as a result of a defective transformer or an incorrect installation of a transformer. Also, we will not be responsible for a transformer failure that is a result of your incorrect installation. By placing an order with us, you thereby accept all terms and conditions.
Payment Terms: Cash In Advance is required on order values under $1000.00 if you do not have established credit with us. Net 30 day open account credit terms may be established but requires the receipt of a purchase order with a total value of at least $1000.00 and you must also provide your Dun & Bradstreet number for a credit check at that time. Open account terms are pending our review and approval of your Dun & Bradstreet credit report only.
Can be used with our optional 40-18036 Marshall* style upright mounting reinforcement bracket set (Sold Separately).
12 pieces @ $60.13 each: To purchase please fill out and submit our Order Form
18 pieces or more @ $55.40 each: To purchase please fill out and submit our Order Form
*Disclaimer: Magnetic Components, Inc. is not affiliated with Fender Musical Instruments Corp., Marshall Amplification, Vox Amplification, Ltd., Leslie & Valco
**All of the above listed amplifier models are trademarks of Fender Musical Instrument Corp., Marshall Amplification, Vox Amplification Ltd., Hammond Suzuki USA, Ltd. (Leslie) & Eastwood Guitars (Valco)
ClassicTone is a registered trademark of Magnetic Components, Inc.
Copyright 2009-2012 Magnetic Components, Inc. All Rights Reserved.
Order Minimums & Sales Terms: For the smaller quantities of 1 to 11 pieces of our catalog items, please contact our distributors, Amp Parts Direct and/or Triode USA to purchase. For the higher quantities of 12 pieces or more of our catalog items (12 piece minimum per item), please contact us directly to purchase.Also, please contact us directly with your custom requirements. We require a minimum of 18 pieces per item on custom requirements. OEM's only for direct orders. Reseller number may be required. Pricing subject to change without notice. Orders are Non Cancelable / Non Returnable. Cost of shipping is not included. We ship UPS prepaid and add to the invoice or UPS freight collect. For shipments with a final destination within the continental USA, the cost of UPS shipping plus insurance is added only. Other destinations may require shipping / handling charges due to special packaging and/or processing requirements.
Other Related ClassicTone Offerings to Part Number 40-18026:
 | ||||
Marshall 100W
Plexi
Style Amps
| ||||
Chokes
| ||||||
| ||||
Power Transformers
Output Transformers
40-18046 (100/120/220/230/240V Multi-Feature Laydown Version)
40-18053 (120/220/240V Multi-Feature Upright Version)
40-18026 (1.7K - 4/ 8/ 16 Ohm Original Version)
40-18072 (2.2K - 4/ 8 / 16 Ohm, Larger Sized, Upgrade Version)
40-18058 (3 Hy, 250mA DC Original Version)
Marshall 100W
JMP
&
JCM800
Style Amps
| ||||||
| ||||
Chokes
| ||||||
| ||||
Power Transformers
Output Transformers
40-18024 (120/220/240V Upright Original Version)
40-18053 (120/220/240V Upright Upgrade with M-6 and Copper Flux Band)
40-18032 (5 Hy, 120mA DC Original Version)
| ||||||
Hardware
40-18036 (Upright Mounting Reinforcement Bracket Set)
| ||||||
Hardware
40-18036 (Upright Mounting Reinforcement Bracket Set)
40-18026 (1.7K - 4/ 8/ 16 Ohm Original Version)
40-18072 (2.2K - 4/ 8/ 16 Ohm, Larger Sized, Upgrade Version)
