General Features:
CLASSICTONE #              TYPE                                                        REFERENCE #
40-18038                   Output, 20W - 6.6K to 4/8 Ohms           125A1A, 022640, 041318

Amps Used In: Deluxe** & Deluxe Reverb** style amplifiers
Description: All of ours have shields for extra protection. Like the vintage era originals, ours are paper layer wound for that ultimate tone! This is a 4/8 Ohm version of the classic! This is a great general purpose 4/8 Ohm output transformer for many 20W or "so" type new OEM amp builds and D.I. Y. amp projects as well.

See Specifications for details!
Series: Plus
ClassicTone Part Number 40-18038
TM
Vintage Constructed Amplifier Transformers by Magnetic Components, Inc.
MADE IN USA
Part Number 40-18038
Fender Style:  4/8 Ohm, 20W Output Transformer  
Various Views of 40-18038
Note: These are reference numbers only.
See specifications for details.
Other Related ClassicTone Offerings to Part Number 40-18038:
Chokes
Reverb Driver
Power Transformers
Output Transformers
40-18016 (120V Original Laydown Version)
40-18017 (Dual Primary 120/240V Laydown Version)
40-18028 (100/120/220/230/240V Laydown Version with Extra Features)
40-18066 (Upright Mounted 120/240V Version)
40-18002 (6.6K - 8 Ohm Original Version)
40-18038 (6.6K - 4 / 8 Ohm Version)
40-18087 (6.6K - 4 / 8 / 16 Ohm Larger Upgrade Version)

40-18040 (4 Hy, 50mA DC)
40-18034 (25K - 8 Ohm)
*Disclaimer: Magnetic Components, Inc. is not affiliated with Fender Musical Instruments Corp., Marshall Amplification, Vox Amplification, Ltd., Leslie & Valco 
**All of the above listed amplifier models are trademarks of Fender Musical Instrument Corp., Marshall Amplification, Vox Amplification Ltd., Hammond Suzuki     USA, Ltd. (Leslie)  & Eastwood Guitars (Valco)
ClassicTone is a registered trademark of Magnetic Components, Inc. 
Copyright 2009-2021 Magnetic Components, Inc. All Rights Reserved.
WARNING: Transformers should always be installed by a professional electronics technician since there are high voltages involved and may result in serious physical harm to yourself, the transformer and/or your equipment if installed incorrectly. 
Paper layer wound like the vintage era originals!
Made in USA by us at Magnetic Components, Inc.
Made with premium materials
Features custom, solventless, varnish for vintage look and high performance
Proper raised mountings / No chassis modification required on most
Made with pre-tinned "Topcoat" PVC appliance wire for ease of soldering
RoHS Compliant
ClassicTone Series: Vintage, Plus & Custom
Please buy from ClassicTone Resellers while supplies last.