General Features:
ClassicTone Part Number 40-18052
CLASSICTONE #               TYPE                                                          REFERENCE #
40-18052                          Output, 5W Single Ended - 3.2 Ohm       E-2640, 2640 & T-2640 

Amps Used In:  Valco* 22, 510-33, 510-149 & 6150 
                                Valco*  "Gretsch" G6150, G6151 & G6152
                                Valco* "Airline" GVC-9045A
                                Valco* "Supro" S1606, S1616T & S6606

Description: We were the main original transformer supplier for Valco from 1950 to 1965, therefore this is a true Magnetic Components, Inc. vintage original transformer. We are proud to bring these to you again after more than 50 years. These are made according to our original specifications we just recently found in our engineering archives. This is a great vintage era type constructed, paper layer wound single ended output transformer! 

See Specifications for details!

Series: Vintage    
Note: These are reference numbers only.
See specifications for details.
Vintage Constructed Amplifier Transformers by Magnetic Components, Inc.
Part Number 40-18052
Valco Style: 5W Single Ended Output Transformer, 3.2 Ohms 
Power Transformers
Output Transformers
40-18051 (117V, "Supro" S1606 Style PT)
40-18052 (5K - 3.2 Ohm, Single Ended, "Supro" S1606 Style OT)
Other Related ClassicTone Offerings to Part Number 40-18052:
*Disclaimer: Magnetic Components, Inc. is not affiliated with Fender Musical Instruments Corp., Marshall Amplification, Vox Amplification, Ltd., Leslie & Valco 
**All of the above listed amplifier models are trademarks of Fender Musical Instrument Corp., Marshall Amplification, Vox Amplification Ltd., Hammond Suzuki     USA, Ltd. (Leslie)  & Eastwood Guitars (Valco)
ClassicTone is a registered trademark of Magnetic Components, Inc. 
Copyright 2009-2021 Magnetic Components, Inc. All Rights Reserved.
WARNING: Transformers should always be installed by a professional electronics technician since there are high voltages involved and may result in serious physical harm to yourself, the transformer and/or your equipment if installed incorrectly. 
Paper layer wound like the vintage era originals!
Made in USA by us at Magnetic Components, Inc.
Made with premium materials
Features custom, solventless, varnish for vintage look and high performance
Proper raised mountings / No chassis modification required on most
Made with pre-tinned "Topcoat" PVC appliance wire for ease of soldering
RoHS Compliant
ClassicTone Series: Vintage, Plus & Custom
Please buy from ClassicTone Resellers while supplies last.