General Features:
ClassicTone Part Number 40-18090
CLASSICTONE #            TYPE                                                                REFERENCE #
40-18090                Output, 20W- 8K to 4/8/16 Ohms                   50246





Amps Used In: 5E3 Tweed Deluxe** style amps and general purpose 20W or "so" project amps

Description: This is a vintage constructed, paper layer wound output transformer that was based upon the interleaving winding pattern of a '50s original Fender 5E3 Deluxe** output transformer! This is a larger, upgrade version of the original featuring 8K to 4 / 8 / 16 Ohms. Even though it is taller than the originals, it will fit the same mounting centers. Also, this is good for 20W or "so" D.I.Y. amp projects and new OEM builds as well!

See Specifications for details!

Series: Plus
TM
Vintage Constructed Amplifier Transformers by Magnetic Components, Inc.
MADE IN USA
Part Number 40-18090
Fender Style: 8K to 4/8/16 Ohm, 20W, Output Transformer
Note: These are reference numbers only.
See specifications for details.
Power Transformers
Output Transformers
40-18022 (8K - 8 Ohm Original Version)
40-18090 (8K- 4/8/16 Ohm Larger Upgrade Version)
Other Related ClassicTone Offerings to Part Number 40-18090:
*Disclaimer: Magnetic Components, Inc. is not affiliated with Fender Musical Instruments Corp., Marshall Amplification, Vox Amplification, Ltd., Leslie & Valco 
**All of the above listed amplifier models are trademarks of Fender Musical Instrument Corp., Marshall Amplification, Vox Amplification Ltd., Hammond Suzuki     USA, Ltd. (Leslie)  & Eastwood Guitars (Valco)
ClassicTone is a registered trademark of Magnetic Components, Inc. 
Copyright 2009-2021 Magnetic Components, Inc. All Rights Reserved.
WARNING: Transformers should always be installed by a professional electronics technician since there are high voltages involved and may result in serious physical harm to yourself, the transformer and/or your equipment if installed incorrectly. 
Paper layer wound like the vintage era originals!
Made in USA by us at Magnetic Components, Inc.
Made with premium materials
Features custom, solventless, varnish for vintage look and high performance
Proper raised mountings / No chassis modification required on most
Made with pre-tinned "Topcoat" PVC appliance wire for ease of soldering
RoHS Compliant
ClassicTone Series: Vintage, Plus & Custom
Chokes
Reverb Driver
Power Transformers
Output Transformers
40-18087 (6.6K - 4 / 8 / 16 Ohm)
40-18090 (8K- 4/8/16 Ohm )
40-18034 (25K - 8 Ohm)
40-18040 (4 Hy, 50mA DC)
40-18066 (20W Upright PT, 120/240V To 660VCT@120mA, 50V BIAS, 6.3V@3A, 5V@3A)
40-18021 (120V Original Version)
40-18078 (100/120/220/230/240V With Extra Features Version)
Please buy from ClassicTone Resellers while supplies last.