General Features:
Marshall 100W JMP & JCM800 Style Transformers
Marshall 100W JMP & JCM800 Style Transformers
ClassicTone Transformers (Home Page)   >>  Marshall Style Transformers >>  Marshall 100W JMP & JCM800 Style Transformers
Marshall Style Transformers
Vintage Constructed Amplifier Transformers by Magnetic Components, Inc.
Marshall Style Amplifiers- 100W
100W JMP & JCM800 Style Transformers
Output Transformers
Power Transformers
ClassicTone # 40-18026
Marshall  Plexi, JMP & JCM800 Style,
100W Output Transformer, 4/8/16 Ohm
100W Plexi**, JMP** & JCM800**
C1998 & C2668
(General Purpose / Upgrade Version)

ClassicTone # 40-18036 Marshall Style,
Mounting Support  Bracket Set
Mounting Reinforcement Support
For Marshall* Style
Upright  Mounted Transformers
(for use with 40-18023, 40-18024,
40-18026, 40-18067, 40-18053 & 40-18095)

ClassicTone # 40-18024
Marshall JMP & JCM800 Style,
100W Power Transformer
100W JMP** & JCM800**
T2562 & T4145
(General Purpose, Upright Mounted Version)

ClassicTone # 40-18053
Marshall Plexi, JMP & JCM800 Style,
100W Upgrade Power Transformer
100W  Plexi**, JMP** & JCM800**
T2562 & T4145
(Upright Mounted, Upgrade Version with M-6 and Flux Band)

ClassicTone # 40-18032 Marshall JMP & JCM800 Style, 5 Hy, 120 mA DC Choke
Most 50W & 100W
JMP** & JCM800** Type Amps
(General Purpose Version)

100W JMP & JCM800 Style OT
*Disclaimer: Magnetic Components, Inc. is not affiliated with Fender Musical Instruments Corp., Marshall Amplification, Vox Amplification, Ltd., Leslie & Valco 
**All of the above listed amplifier models are trademarks of Fender Musical Instrument Corp., Marshall Amplification, Vox Amplification Ltd., Hammond Suzuki     USA, Ltd. (Leslie)  & Eastwood Guitars (Valco)
ClassicTone is a registered trademark of Magnetic Components, Inc. 
Copyright 2009-2021 Magnetic Components, Inc. All Rights Reserved.
WARNING: Transformers should always be installed by a professional electronics technician since there are high voltages involved and may result in serious physical harm to yourself, the transformer and/or your equipment if installed incorrectly. 
Paper layer wound like the vintage era originals!
Made in USA by us at Magnetic Components, Inc.
Made with premium materials
Features custom, solventless, varnish for vintage look and high performance
Proper raised mountings / No chassis modification required on most
Made with pre-tinned "Topcoat" PVC appliance wire for ease of soldering
RoHS Compliant
ClassicTone Series: Vintage, Plus & Custom