General Features:
TM
Marshall 100W JTM45/100 Style Transformers
Marshall 100W JCM45/100 Style Transformers
ClassicTone Transformers (Home Page)   >>  Marshall Style Transformers >>  Marshall 100W JTM45/100 Style Transformers
Marshall Style Transformers
Vintage Constructed Amplifier Transformers by Magnetic Components, Inc.
MADE IN USA
Marshall Style Amplifiers- 100W
100W JTM45/100 Style Amplifiers
Power Transformers
ClassicTone # 40-18068
Marshall JTM45/100 Style,
100W Power Transformer
FOR:
100W JTM45/100
Style Amps
1204-43
(Original Version)


Output Transformers
Chokes
ClassicTone # 40-18059
Marshall RS Style,
20 Hy Choke
FOR:
JTM45**
Style Amps
(Original Version)


ClassicTone # 40-18058
Marshall Vintage Plexi Style,
3 Hy Choke
FOR:
Most 45W, 50W & 100W
Plexi** Style Amps
352-114 & C1999
(Original Version)


3 Hy Plexi Style Choke
100W JTM45/100 OT
ClassicTone # 40-18036 Marshall Style,
Mounting Support  Bracket Set
FOR:
Mounting Reinforcement Support
For Marshall*
Upright Style Mounted Transformers
(for use with 40-18023, 40-18024, 40-18026,
40-18053 & 40-18067)




JTM45/100 Style PT, 100/120/220/230/240V
*Disclaimer: Magnetic Components, Inc. is not affiliated with Fender Musical Instruments Corp., Marshall Amplification, Vox Amplification, Ltd., Leslie & Valco 
**All of the above listed amplifier models are trademarks of Fender Musical Instrument Corp., Marshall Amplification, Vox Amplification Ltd., Hammond Suzuki     USA, Ltd. (Leslie)  & Eastwood Guitars (Valco)
ClassicTone is a registered trademark of Magnetic Components, Inc. 
Copyright 2009-2020 Magnetic Components, Inc. All Rights Reserved.
WARNING: Transformers should always be installed by a professional electronics technician since there are high voltages involved and may result in serious physical harm to yourself, the transformer and/or your equipment if installed incorrectly. 
Paper layer wound like the vintage era originals!
Made in USA by us at Magnetic Components, Inc.
Made with premium materials
Features custom, solventless, varnish for vintage look and high performance
Proper raised mountings / No chassis modification required on most
Made with pre-tinned "Topcoat" PVC appliance wire for ease of soldering
RoHS Compliant
ClassicTone Series: Vintage, Plus & Custom

JTM45/100 Style PT, 100/120/220/230/240V