*Disclaimer: Magnetic Components, Inc. is not affiliated with Fender Musical Instruments Corp., Marshall Amplification, Vox Amplification, Ltd., Leslie & Valco 
**All of the above listed amplifier models are trademarks of Fender Musical Instrument Corp., Marshall Amplification, Vox Amplification Ltd., Hammond Suzuki     USA, Ltd. (Leslie)  & Eastwood Guitars (Valco)
ClassicTone is a registered trademark of Magnetic Components, Inc. 
Copyright 2009-2018 Magnetic Components, Inc. All Rights Reserved.
Custom Output Transformer
Request For Quote Form
Custom
Your Custom Output Transformer Requirements:
Submit RFQ
Your Name
Your Email Address
Your Phone Number
* Required 
* Required 
* Required 
Your Company Name
Request For Quote Quantities
(10 to18 Piece Minimum Per Item)
* Required 
* Required 
* Required 
Maximum Unit Dimensions
Width x Height x Depth (In Inches)
Mounting Centers
* Required 
Length on 2 Hole mounted units or
Length x Width on 4 hole mounted units (In Inches)
Mounting Type
* Required 
Cover, Shield Or Channel Frame Finish
* Optional but important! 
* Required 
General Request For Quotation Information:
Your Location or Ship to Address
Marking Options
If your marking, what number or description?
* Optional 
* Optional 
Please Fill Out and Submit the following Request For Quote Form:
Other Requirements, Comments, Requests, etc.
supply specific details & it may be at extra $
Your Fax Number
* Optional 
* Required 
General Design Requirements:
Minimums as low as 10 pieces per item in some cases.
Serious OEM / Reseller inquiries only. For direct order only.
* Optional 
Primary Winding:
Primary Impedance
* Required 
Unit of Measure= Ohms
Push- Pull
or Single Ended?
* Required 
If Single Ended, what is the primary Amps DC?
* Required if single ended only
Unit of Measure= IDC
Ultralinear Taps?
* Required 
Secondary Winding:
Secondary Impedance(s)
* Required 
* Required 
Unit of Measure= Watts
Amp Power
Frequency Response Range  
* Optional 
From
Hz, To
kHz
Notes: All transformers will be supplied with RoHS compliant topcoat appliance wire all at 12" length and of our chosen colors unless otherwise specified.
ClassicTone Transformers (Home Page)   >>  ClassicTone Custom   >>  ClassicTone Output Transformer RFQ Form
10 to 18 Piece Minimum
50 Pieces
100 Pieces
250 pieces
500 pieces
1000 Pieces
18 to 50 Pieces
18 to 100 Pieces
18 to 250 Pieces
18 to 500 Pieces
18 to 1000 Pieces
Vertical Mounted (with 2 covers with feet with 4 mounting holes & mounted on high or tall side)
Horizontal Mounted (with 2 covers with feet with 4 mounting holes & mounted on low or long side)
Laydown Mounted (with 2 covers & 4 screw mounting through chassis)
Channel Frame Mounted (with two hole feet mounting)
Black Oxide (generally available on 4 hole mounted Fender & Leslie style products)
Zinc (generally available on 4 hole mounted Marshall & Vox style transformers)
Electro Tin Coated (only available on 2 hole mounted units with channel frames or shields)
Black Oxide on channel frames & shields (at extra $)
You are an Established OEM, Reseller and/or Dealer
Push-Pull
Single Ended
No
Yes
2 Ohm Only
4 Ohm Only
8 Ohm Only
16 Ohm Only
2 Ohm & 4 Ohm
4 Ohm & 8 Ohm
8 Ohm & 16 Ohm
2 Ohm, 4 Ohm & 8 Ohm
4 Ohms, 8 Ohm & 16 Ohm