*Disclaimer: Magnetic Components, Inc. is not affiliated with Fender Musical Instruments Corp., Marshall Amplification, Vox Amplification, Ltd., Leslie & Valco 
**All of the above listed amplifier models are trademarks of Fender Musical Instrument Corp., Marshall Amplification, Vox Amplification Ltd., Hammond Suzuki     USA, Ltd. (Leslie)  & Eastwood Guitars (Valco)
ClassicTone is a registered trademark of Magnetic Components, Inc. 
Copyright 2009-2018 Magnetic Components, Inc. All Rights Reserved.
Custom Power Transformer
Request For Quote Form
Custom
Please Fill Out and Submit the following Request For Quote Form:
Your Custom Power Transformer Requirements:
Submit RFQ
Your Name
Your Email Address
Your Phone Number
* Required 
* Required 
* Required 
Your Company Name
Request For Quote Quantities
(10 to 18 Piece Minimum Per Item)
* Required 
* Required 
* Required 
Maximum Unit Dimensions
Width x Height x Depth (In Inches)
Mounting Centers
* Required 
Length on 2 Hole mounted units or
Length x Width on 4 hole mounted units (In Inches)
Mounting Type
* Required 
Cover, Shield Or Channel Frame Finish
* Optional but important! 
* Required 
General Request For Quotation Information:
Your Location or Ship to Address
Marking Options
If your marking, what number or description?
* Optional 
Other Requirements, Comments, Requests, etc.
supply specific details & it may be at extra $
Your Fax Number
* Optional 
* Required 
General Design Requirements:
Minimums as low as 10 pieces per item in some cases.
Serious OEM / Reseller inquiries only. For direct order only.
Primary Voltages
* Required 
Secondary Winding Requirements:
Plate Winding:
Volts
DC Current
In IDC
Bias Tap 
In VAC
Heater Winding:
* Required 
* Required 
* Optional 
Heater Winding Volts AC 
In VAC 
Heater Winding Amps AC 
In IAC
Rectifier or Rectification:
* Required 
* Required 
Rectifier Type
Heater Winding Center Tap? 
* Required 
* Required 
* Optional 
If Tube Recification, which tube type?
* Required if tube rectified
If Solid State Recification, what type?
* Optional 
Additional Secondaries:
In VAC @ 
In IAC
* Required
if additional
secondary needed
* Required
if additional
secondary needed
In VAC @ 
In IAC
* Required
if additional
secondary needed
* Required
if additional
secondary needed
In VAC @ 
In IAC
* Required
if additional
secondary needed
* Required
if additional
secondary needed
Other Power Transformer Requirements
* Required 
Notes: All transformers will be supplied with RoHS compliant topcoat appliance wire all at 12" length and of our chosen colors unless otherwise specified.
* Optional 
* Optional 
In VAC or VDC?
* Required 
Other Tube Type (other than above)?
* Required 
ClassicTone Transformers (Home Page)   >>  ClassicTone Custom   >>  ClassicTone Power Transformer RFQ Form
* Optional 
* Required if solid state rectified
10 to 18 Piece Minimum
50 Pieces
100 Pieces
250 pieces
500 pieces
1000 Pieces
18 to 50 Pieces
18 to 100 Pieces
18 to 250 Pieces
18 to 500 Pieces
18 to 1000 Pieces
Vertical Mounted (with 2 covers with feet with 4 mounting holes & mounted on high or tall side)
Horizontal Mounted (with 2 covers with feet with 4 mounting holes & mounted on low or long side)
Laydown Mounted (with 2 covers & 4 screw mounting through chassis)
Channel Frame Mounted (with two hole feet mounting)
Black Oxide (generally available on 4 hole mounted Fender & Leslie style products)
Zinc (generally available on 4 hole mounted Marshall & Vox style transformers)
Electro Tin Coated (only available on 2 hole mounted units with channel frames or shields)
Black Oxide on channel frames & shields (at extra $)
You are an Established OEM, Reseller and/or Dealer
120V, 60 Hz
120V / 240V Dual Primary, 50 / 60 Hz
120V / 220V / 240V, 50 / 60 Hz
120V / 220V / 230V / 240V, 50 / 60 Hz
100V / 120V / 220V / 230V / 240V, 50 / 60 Hz
Tube
Solid State
Yes
No
Full Wave Bridge
Full Wave Center Tap
AC
DC